# Only the system administrator should modify this file, ordinary users
# should not have to change anything.

[Daemon]

# Should we log transactions to the database.
#
# default=true
TransactionLogging=true

# Use NetworkManager where available. If disabled, then NM state will be ignored.
#
# default=true
UseNetworkManager=true

# Use Connman where available. If disabled, then Connman state will be ignored.
#
# default=false
UseNetworkConnman=false

# If neither NetworkManager nor ConnMan is not available, then use the presence
# of default route to indicate a viable network connection.
# If disabled, and no NM or CM, then the network is assumed to be always online.
#
# default=true
UseNetworkHeuristic=true

# If we should use the estimated time value.
# This will be inaccurate where backends do not send proportional percentage
# changed signals, or when updates are not frequent enough.
# Estimated time will then only be used when the prediction accuracy is high
# enough and will not be set at the very start or end of a transaction.
#
# default=true
UseRemainingTimeEstimation=false

# Shut down the daemon after this many seconds idle. 0 means don't shutdown.
#
# default=300
ShutdownTimeout=300

# Unlock the backend after this many seconds idle.
#
# default=5
BackendShutdownTimeout=5

# Set the priority of the spawned backend to this priority.
# This ensures the process does not hog the system when performing actions.
#
# Values range from -20 (most favorable) to 19 (least favorable)
# A niceness value of 0 will not attempt to set any priority.
#
# default=0
BackendSpawnNiceValue=0

# Set the priority of the spawned backend to this priority for low priority tasks.
# This ensures the process does not hog the system when performing actions.
#
# Values range from -20 (most favorable) to 19 (least favorable)
# A niceness value of 0 will not attempt to set any priority.
#
# default=10
BackendSpawnNiceValueBackground=10

# Set the iopriority class of the spawned backend to idle.
# This ensures the process does not hog the disk when performing actions.
#
# default=true
BackendSpawnIdleIO=true

# Set the iopriority class of the spawned backend to idle for low priority tasks.
# This ensures the process does not hog the disk when performing actions.
#
# default=true
BackendSpawnIdleIOBackground=true

# Set whether the spawned backends are allowed to be SIGKILLed if they do not
# respond to SIGQUIT. This ensures that Cancel() works as expected, but
# somtimes can corrupt databases if they are open.
#
# Only change this to FALSE if your backend can not be SIGKILLed without
# database corruption.
#
# Even if this is set TRUE, the backend can still enforce this FALSE if it it
# explicitly set in the compiled backend. You can think of this as a fallback
# value that is used when backends do not enforce policy, or as a way to disable
# SIGKILL even for backends that calim to support it.
#
# default=true
BackendSpawnAllowSIGKILL=true

# Default backend, as chosen in the configure script. This will be used where
# no --backend="foo" option is given to the daemon.
#
# default=yum
DefaultBackend=yum

# Use syslog to audit and log actions where available.
#
# default=false
UseSyslog=false

# Proxy settings, uncomment as required
#
# NOTE: PackageKit does not use these settings, they are passed to backends.
# Backends may ignore these values, or they may be updated from the session.
#
# They are in the format username:password@server:port
#
# ProxyHTTP=username:password@server.lan:8080
# ProxyFTP=server.lan:21

# Scan installed desktop files when we update or install packages
#
# NOTE: Don't enable this for backends that are slow doing SearchFile()
#
# default=true
ScanDesktopFiles=true

# Update the package list when we refresh the cache
#
# NOTE: Don't enable this for backends that are slow doing GetPackages()
#
# default=true
UpdatePackageList=true

# Check for running processes when we update packages
#
# NOTE: Don't enable this for backends that are slow doing GetFiles() on
# installed files.
#
# default=true
UpdateCheckProcesses=true

# Check for shared libraries that are in use, that are replaced by packages
# that are marked as security updates.
#
# NOTE: Don't enable this for backends that are slow doing GetFiles() on
# installed files.
#
# default=true
CheckSharedLibrariesInUse=true

# Check for updates in testing repositories when we check for updates
#
# NOTE: Don't enable this if you do not want testing updates to be checked
# as this will increase the network bandwidth used.
#
# default=true
CheckTestingRepos=true

# Use update cache when possible to avoid using the backend
#
# NOTE: Don't disable this unless you're trying to find bugs in packagekitd
# and you want your backend to service every request.
#
# default=true
UseUpdateCache=true

# Use strict developer checking in the daemon
#
# This should be set to TRUE if the backend should be run in strict compliance
# mode, which is useful when developing a backend. Normal sane users should not
# have to use this mode.
#
# If this is set to FALSE, then the daemon will try to 'fix' any craziness in
# the backend without notifying the end user.
#
# default=false
DeveloperMode=false

# The time in seconds to wait when we get the StateHasChanged method
#
# This should be used when a native tool has been used, and the update UIs
# should be updated to reflect reality.
#
# default=5
StateChangedTimeoutPriority=5

# The time in seconds to wait after the computer has been resumed or any non
# package related system event
#
# We don't want to be doing an update check at the busy time after a resume
#
# default=600
StateChangedTimeoutNormal=600

# The maximum number of requests a given user is able to request and queue
#
# Setting this lower decreases the risk of a local denial of service, but may
# cause errors if the desktop client is doing many requests to the daemon in a
# short period of time.
#
# default=500
SimultaneousTransactionsForUid=500

# The maximum number of items that can be resolved in one method
#
# Setting this lower decreases the risk of a local denial of service, but may
# cause errors if the desktop client is trying to resolve a large number of
# packages in one method.
#
# default=100
MaximumItemsToResolve=100

# The maximum number of packages that can be processed in one method
#
# Setting this lower decreases the risk of a local denial of service, but may
# cause errors if the desktop client is trying to do a large transaction.
#
# default=2500
MaximumPackagesToProcess=2500

# How long the transaction is valid before it's destroyed, in seconds
#
# The client only has a finite amount of time to use the object, else it is
# destroyed. Setting this longer will allow malicious clients to queue up large
# number of authentication requests, but setting this shorter will reduce the
# amount of time the user has to authenticate.
#
# default=300
TransactionCreateCommitTimeout=300

# How long the transaction should be queriable after it is finished, in seconds
#
# Give the client a few seconds to still query the transaction after it has
# finished by keeping it on the bus. Setting this larger allows clients to query
# the transaction without accessing the database, but increases memory usage.
#
# default=5
TransactionKeepFinishedTimeout=5

# If certain operations should be done using IDLE bandwidth
#
# TCP Low Priority is a congestion control algorithm included in the kernel.
# Connections using this algorithm will use only idle bandwidth. In other words,
# it is a self-tuning TCP stack. Setting this to FALSE will mean that the check
# for updates happens more quickly, at the expense of other network applications
# such as firefox and other file downloaders.
#
# If the user is running the network at 100% for extended periods of time, then
# the update check may be starved and take a very long time to complete. In this
# rare case, this setting should be set to FALSE.
#
# By also setting this setting to TRUE makes the possibility of a environment
# mismatch much higher for a spawned backend. This will make switching from idle
# operations (such as GetUpdates) and full speed operations (such as
# InstallPackages) take longer. If this is a concern, then set this to FALSE.
#
# default=true
UseIdleBandwidth=true